PCI Quad 4 Port Fast Ethernet Card
The AEI-P430C Quad Fast Ethernet (QFE) card is based on the popular Intel 82559 Ethernet Controller chipset. The device driver is embedded into many operating systems, and hence plug and play in Windows, Linux, and other operating systems.
Firewalls and application servers on Fast Ethernet networks can now get the bandwidth they need with the P430C Quadport PCI network interface card. This high-performance card can support four separate 10/100 Mbps copper network segments at full bandwidth.
Unlike many "server class" adapters on the market today, the P430C was designed for cross platform. This means additional noise impedance has been engineered into the board. The P430C has a clean design, high precision oscillator, integrated magnetics, high-end surface mount discrete components, and additional filtering. The cumulative effect is a card that is high performance, highly reliable, and fault tolerant. Subsequently, it provides a much higher return on investment when compared to the competition.
The P430C is provided with universal keying to support either 3.3V or 5V systems.
The P430C is fully interoperable with existing Ethernet hubs, switches and routers. AEI Fast Ethernet cards provided increased bandwidth for event the most congested network.
Consolidate multiple server ports onto a single card
Cross Platform Support for all popular server platforms.
Reduces Server Overhead.
Easy to install and configure.
Half or Full Duplex operation.
Dual speed 10Mbps (10Base-T) or 100 Mbps (100Base-Tx)
Maximum throughput of 800Mbps.
DMA Bus Mastering for lower CPU utilization.
Universal Short Card form factor.
Firewalls and other Internet security appliances.
Proxy, application, file, and print servers.
SOHO to Enterprise network environments.
Internet Service Providers / Web Hosting
Storage Area Networks (SAN)
Network Attached Storage (NAS)
Network segmentation (for network security purposes)
Gateways and routers.
Configurations AEI-P430C.. PCI 10/100 Quad Fast Ethernet NIC.
Connector Quad RJ-45(f)
10/100Base-Tx with integrated magnetics module.
IEEE Standards IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-Tx Ethernet)
IEEE 802.3ad (Port Aggregation)
802.1x (Flow Control)
Fast EtherChannel (FEC) supported.
Speeds 10Base-T (Up to 20Mbps)
100Base-Tx ( Up to 200 Mbps)
Interrupt Coalescing All four ports share one IRQ
Duplex Half or Full Duplex operation
Boot ROM Contact Us for details
Parallel Detection Yes
Auto-negotiation / NWay
Auto-negotiation between full and half duplex operations, AND
between 10 Mbps and 100 Mbps
Data transfer Mode DMA Bus Mastering
LEDs Link, Activity, and Speed
Slot Type 32/64-bit, 33MHz
3.3V or 5V slot
Universal short card
Bus Type PCI 2.1 & 2.2 compliant, compatible with PCI-X slots
Driver Support Device Drivers
Drivers are built into the operating system (plug & play) in virtually all Windows, Linux, and other popular operating systems.
For Windows Vista and Server 2008 (Click Here)
Certifications FCC Part 15, Subpart B - Class A; CE;
MTBF * 120 Years
Environment Specs Temperature: operating 0C to 60C
Humidity: 10 to 95% non-condensing
Dimensions 6.8" (L) x 4.2" (H)
Universal Short Card
Power Consumption Operating Voltage: 3.3VDC/5VDC
* According to Telcordia SR-332 Issue 1 Environmental condition GB (Ground, Fixed, Controlled). Ambient temperature - 25°C. Temperature rise of 10°C above the system ambient temperature was assumed for the cards components.